manualshive.com logo in svg

AEG Birdy, Руководство по эксплуатации

Поделиться
Скачать
AEG Birdy Скачать руководство пользователя страница 46

10. Troubleshooting

No display.

•

Check connection of the battery.

•

Install the handset in its cradle to charge the battery.

•

Remove the battery from the handset, reinstall it and switch on the hand-
set.

The battery is empty.

•

Check connection of the battery.

•

Clean the charge contacts on handset and base set.

•

Recharge the battery.

The battery indicator shows a weak battery and the handset emits the inter-
mittent warning tone.

•

Recharge the battery of the handset.

The handset does not find the base.

•

You are out of range, go nearer to the base.

•

Check the power supply of the base.

•

Subscribe the handset to a base set following the subscription procedure.

•

Remove the battery from the handset, reinstall it and switch on the hand-
set.

•

Disconnect the adaptor from the base set and reconnect it.

No dial tone.

•

Check connection of the telephone line cord to the base set.

•

Increase the speaker volume of the handset.

No dialling.

•

The number you have dialled is barred.

You have forgotten your PIN code.

•

Perform a full reset of the handset.

Bad voice quality (Birdy Voice only).

•

Repeat what you have said speaking more slowly and close to the micro-
phone.

46

Содержание Birdy





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды