manualshive.com logo in svg

AEG Birdy, Руководство по эксплуатации

Поделиться
Скачать
AEG Birdy Скачать руководство пользователя страница 10

3.3

Belt Clip

1.

Slide the belt clip (

22

) over the back of the handset up to the notches (Fig. 3).

2.

To remove the belt clip (

22

), lift one end from a notch.

Fig. 3

10

Notches

3.4

Replacing the Battery

1.

Open the cover of the battery compartment.

2.

Diconnect the battery plug.

3.

Place the new battery pack into the compartment and connect the plug.

4.

Close properly.

Important:

Batteries are dangerous chemical waste. Used batteries cannot

be thrown away with household refuse but have to be discarded in an eco-
logical way, e.g. special battery collection. 
Batteries are poisonous. Keep them away from children.

3.5

Charge Indication

100 % charged

50 % charged

+ warning tones: Weak battery

3.6

Out of Range

1.

When the handset gets too far away from the base set, the handset emits
a warning tone. SEARCHING is displayed and the antenna symbol 
flashes.

2.

Go nearer to the base set.

3.

When you hear a tone and the antenna symbol 

lights permanently

contact is restored.

Battery compartment
Push to open

Содержание Birdy





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды