AEG BE7004101M, Руководство пользователя

Страница: 13 / 40

4. Touch or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Touch . The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes. and time
setting flash in the display. The appliance
deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes. and the
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4.
Touch .
5. Use or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing .
7. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes. and the time setting flash in
the display. The appliance deactivates
automatically.
8. Touch a sensor field or open the
oven door to stop the acoustic
signal.
9. Turn off the appliance.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and . The
dot shows which clock
function is on in the Clock /
residual heat display.
7.6
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature.
2. Set the DURATION.
3. Touch again and again until
flashes in the display.
4.
Touch to set the SET+GO
function.
The display shows and with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.7 Setting the MINUTE
MINDER
1. Touch .
and "00" flash in the display.
2.
Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use or to set the MINUTE
MINDER and to confirm.
ENGLISH 13