41
PD201809 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.2-18 EN
41
5.4.5 System Information
Press “ ” and “ ” in the main interface to select “System Information”, and then press “ENT” to view the parameters
shown in figure 16H.
System Information
Part No .
Serial No .
Soft Ver
Figure 16H: System information
The system information include product model, serial number (serial No), software version and certificate version. If
you select “Software version” in the “System version”, you will be able to see inverter Version 1, Version 2, MCU software
version, RS485 protocol and other information as shown in picture 16I below.
S y s t e m V e r
V e r s i o n 1 : V 1 . 0 5
V e r s i o n 2 : V 1 . 0 5
M C U V e r s i o n
: V 1 . 0 5
Figure 16I: System version
5.4.6 Faults
Press “ ” and “ ” in the main interface to review the fault history, and then press “ENT” to view the sub-menu shown
in figure 16J.
F a u l t
1 : A 0 0 5 G r i d u n d e r f r e q
2 : A 0 0 1 I n p u t u n d e r V o l t
3 :
1
Figure 16J: Fault information
There are maximal 8 fault information logs in the record shown in figure 16J; if no faults are present, the system will
display the message “No Fault”. Refer to section 5.4.2 for detailed information.
5.4.7 Inverter control
Press “ ” and “ ” in the control interface, and then press “ENT” to view the sub-menu shown in figure 16K.
C o n t r o l M e n u
O n / O f f
Clear
R e s t a r t
F a c t o r y
Figure 16K: Control interface
