12
818 19 94-00/8
Reversing the door
The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning!
Unplug from the mains before reversing the door.
Open the door and remove the
plinth cover to the front. Move
the door bearing cover on the
plinth cover from the left to the
right. Close the door.
0
1.
With the door closed, remove the
cross-head screws from the lower
door bearing and remove the door
bearing downwards.
2.
Remove the door fitting from the
door bearing (1, 2). Move the
bearing pivot from the right to
the left hand hole (3). Place the
door fitting supplied on the bear-
ing pivot (4, 5).
1
2
5
4
3
