English
33
Settings Menu
In this menu you can change the default settings for the
device. The respective submenu is shown on the left-hand
edge of the screen.
NOTE:
• You can also call up the settings menu with the
SETUP
key (Fig. 1/5) on the remote control.
• In some menus the settings are spread over two pages.
Tap the key on the touch-screen in order to display
the other settings.
SOUND
•
EQ:
Here you can set the desired sound characteristics.
You can choose between: FLAT, CLASSIC, POP, ROCK
and USER.
•
BASS/TREBLE:
Here you can set the bass and treble lev-
els. If sound characteristics other than USER are selected,
the device switches over to USER when adjustments are
made here.
•
BALANCE:
Select the balance between the right-hand
and left-hand loudspeakers.
•
FADER:
Set the cross-fading between the front and rear
loudspeakers.
•
BEEP:
Here you can set the beep when a key is pressed.
–
OFF:
no beep
–
2ND:
A beep is heard if a key with more than one
function is held down.
–
ALL:
A beep is heard whenever a key is pressed.
•
LOUDNESS:
Switch the loudness function on (ON) or off
(OFF).
•
SUBWOOFER:
Switch the subwoofer on (ON) or off (OFF).
DISPLAY
•
SCREEN:
Here you can select the aspect ratio of the
screen. Choices available: 4:3, 16:9 and FULL.
•
BACKLIGHT:
Here you can set the brightness of the
touch-screen. Select between LOW, MID (medium) and
HIGH).
RADIO
•
AREA:
Here you can set the region in which the device is
being operated.
•
STEREO:
Switch stereo operation on (ON) or off (OFF).
•
LOCAL:
–
OFF:
In regions where the signal is too weak the
reception is improved. The letters “LOC” go off in
the display.
–
ON:
In regions where the signal is too strong the
reception is improved. The letters “LOC” appear in
the display.
•
TA VOLUME:
Here you can set the volume of the traffic
announcements.
•
RETUNE:
Select the period of time for the automatic
station search function with traffic announcements or
program information:
–
SHORT:
after approximately 30 seconds
–
LONG:
after approximately 90 seconds
•
PI:
If you travel through an area in which two stations can
be received with the same AF but different PI codes
(PI = program information), reception becomes unstable.
In this situation you have the choice between:
–
SOUND:
If switching should take place between the
two stations the sound of the other station is heard
for less than one second.
–
MUTE:
The sound of another station is suppressed.
•
REGION:
Some stations divide up their programs at
certain times into regional programmes with varying
content.
–
OFF:
The multiregional programs are also heard.
–
ON:
Only the regional programs of the station are
heard.
•
MASK:
For setting which stations should be excluded
during the station search:
–
DPI:
Alternative frequencies with a different PI code
are excluded from the search.
–
ALL:
Alternative frequencies with a different PI code
and without RDS information with a high signal level
are excluded.
•
EON TA:
Switches between the EON functions “DX”
and “LOCAL”.
„For an explanation of the function see
page 31“
•
TA:
Traffic announcements settings
–
SEEK:
When the TA function is activated the device
attempts to tune into a station transmitting traffic
announcements.
–
ALARM: There
is no automatic station adjustment.
If no traffic announcements are being received an
alarm is heard and NO TP/TA appears in the display.
05_AR4026DVD_AEG_SK.indd 33
03.08.11 12:32
Содержание AR 4026 DVD
Страница 43: ...05_AR4026DVD_AEG_SK indd 43 03 08 11 12 32 ...
Страница 44: ...05_AR4026DVD_AEG_SK indd 44 03 08 11 12 32 ...
Страница 45: ...05_AR4026DVD_AEG_SK indd 45 03 08 11 12 32 ...
