17
26
Bulk charging voltage
(C.V voltage)
(only available in 4K/5K
model)
If self-defined is selected in program 5, this program can be
set up. Setting range is from 48.0V to 58.4V and increment of
each click is 0.1V.
27
Floating charging voltage
(only available in 4K/5K
model)
If self-defined is selected in program 5, this program can be
set up. Setting range is from 48.0V to 58.4V and increment of
each click is 0.1V.
29
Low DC cut-off voltage
(only available in 4K/5K
model)
If self-defined is selected in program 5, this program can be
set up. Setting range is from 40.0V to 48.0V and increment of
each click is 0.1V. Low DC cut-off voltage will be fixed to
setting value no matter what percentage of load is connected.
Then, low DC warning voltage is 2V higher than cut-off
voltage, low DC warning return voltage is 4V higher than
cut-off voltage and Cold Start Voltage is 4V higher than cut-off
voltage.
Display Setting
The LCD display information will be switched in turns by pressing “UP” or “DOWN” key. The selectable
information is switched as below order:
input voltage, input frequency, battery voltage, charging current,
PV voltage, output voltage, output frequency, load percentage, load in Watt, load in VA, main CPU Version
and second CPU Version.
Selectable information
LCD display
Input voltage/Output voltage
(Default Display Screen)
Input Voltage=230V, output voltage=230V
Input frequency/Output frequency
Input frequency=50Hz, Output frequency=50Hz
www.
ADVICE
.co.il
e-mail:advice@advice.
co.il
