AdventistSat GEOSATpro DVR1000ci, Руководство по установке

Страница: 27 / 39

www.adventistsat.com Toll Free 866-552-6882
25
When the dish is aimed correctly
programming will display and
the Signal Quality will display
a 90% or better quality level.
This screen shots show a Quality
Reading of a dish that is correctly
aimed at AMC4, 11822.
Once the correct satellite is located, make small adjustments in
elevation and azimuth until maximum signal is indicated on the
quality bar. Quality readings should be as high as possible to insure
optimum picture and sound on the receiver. The higher the quality,
the better the reception. If the signal quality is low the picture will
break up into little squares and the sound will become garbled and
choppy or will disappear completely!
Verify the Quality reading is 70%
or better. If not, peak Quality
reading by fine tuning the dish
angles.
Press VOL/UP arrow to place the receiver
on 12020 (This is LLBN, a weaker
transponder).
Congratulations! The dish is now aimed for optimum reception of
the Adventist channels. Press the
EXIT
button 3 times to exit the
menu screens and view the TV and listen to the Radio channels.