Advent CAM430MV, Инструкция по эксплуатации, Страница: 8 / 20

8
Camera Installation
License Plate Mounting Instructions
1) Remove the rear license plate.
Examine the vehicle to determine the best way to run the power wires to
the reverse lights and the extension cable through the car.
The Camera can be mounted above or below the plate. (For surface
mounting with the included bracket, see the next section.) Determine the
mounting location that best suits your needs. Be sure to verify that your
installation plan complies with local laws and requirements. Most states
require that the state name, registration stickers, and license number are
not obstructed in any way.
Place the camera bracket behind the license plate and line up the holes.
Fasten the camera mounting bracket and the license plate to the vehicle
using the anti-theft screws provided. After installation of screws with the
tool provided, place the tool in the glove compartment or other safe place
for future use.
NOTE: If you decide to mount the camera at the bottom of the license
plate, you must first remove the screw that holds the camera to the
bracket and flip the camera over so the picture will not be displayed up-
side down.