Advent CAM430MV, Инструкция по эксплуатации, Страница: 16 / 20

16
5) Vehicle Width Setting.
This setting is used to adjust the space of parking guideline to be same as
width of vehicle.
Set the vehicle width by pushing "+" or "-" button. Press ENTER button
to complete this setting, and go to camera center offset setting.
6) Camera Offset Calibration.
The Offset setting is to adjust for Cameras that may be mounted off center
on a vehicle. This will insure the parking lines are correctly matched to
the vehicle position.
If the camera is 5 inches to the left side of the vehicle use the "+" to add 5
inches, if the camera is 5 inches to the right of the vehicle use the "-" to
subtract 5 inches. Press the "ENTER" button when this is completed.