18
9)
After you finish the Angle Setting there should be an “ON/OFF”
icon in the top corner of your screen. Take the vehicle out of
reverse gear so the camera shuts down. Wait 2 seconds and then
put the vehicle back into reverse gear. You should see an hour
glass as all the changes are loaded.
10)
Use the mode button to cycle through the different views and
confirm that all is set up to your satisfaction. If necessary you can
run the calibration again at any time.
12)
Reversing Audio
The camera is designed with a built in microphone. If your monitor
supports audio use the adjustment on your monitor to set the desired audio
level.
Содержание CAM430MV
Страница 20: ...20 Add warranty in PDF...
