9
CONFIGURATION
Login
1.
Start your computer. Connect an Ethernet cable between your computer
and the Wireless Access Point.
2.
Make sure your wired station is set to the same subnet as the Wireless
Access Point, i.e. 192.168.1.254
3.
Start your WEB browser. In the
Address
box, enter the following:
HTTP://192.168.1.254
The configuration menu is divided into four categories:
Status, Wireless,
TCP/IP,
and
Other
settings
. Click on the desired setup item to expand
the page in the main navigation page. The setup pages covered in this
utility are described below.
No username and password required for the fist login, however, you can
set up a set of password for the future security and username is can’t
change, for detailed configuration, please refer to the
Password
in the
later section of Configuration.
4. Default username: please key in “admin” on login web page.
Содержание AWN-AP-54MR
