Advantek Networks AWN-AP-54MR, Руководство пользователя

Страница: 14 / 34

11
SSID The SSID differentiates one WLAN from another,
therefore, all access points and all devices attempting
to connect to a specific WLAN must use the same
SSID. It is case-sensitive and must not exceed 32
characters. A device will not be permitted to join the
BSS unless it can provide the unique SSID. An SSID is
also referred to as a network name because essentially
it is a name that identifies a wireless network.
Channel Number The number of channels supported depends on the
region of this Access Point. All stations communicating
with the Access Point must use the same channel.
Encryption WEP Encryption (Wired Equivalent Privacy) is set to
Disabled by default. When WEP is enabled, data
packet is encrypted
before being transmitted. The WEP prevents data
packets from being eavesdropped by unrelated people.
By using WEP data encryption, there may be a
significant degradation of the data throughput on the
wireless link.
Associated Clients Displays the total number of clients associated to this
AP. You can have up to 64 clients to associate to this
Access Point.
BSSID BSSID displays the ID of current BSS, which uniquely
identifies each BSS. In AP mode, this value is the MAC
address of this Access Point.
TCP/IP Configuration
IP Protocol
Display the method to get the IP of this AP, which could
be
obtained by Fixed-IP or DHCP-client.
br0 IP Address Current IP address for this Access Point
br0 Subnet Mask Current Subnet mask for this Access Point
br0 Default Gateway Default Gateway for this Access Point
br0 MAC Address The MAC Address for this Access Point
Statistics
The Statistics table shows the packets sent/received over wireless and
ethernet LAN respectively.