Advantech POC127, Руководство пользователя

Страница: 24 / 93

POC-127 User Manual 12
Step 2. Prepare the grounding cable and the other terminal links to the hospital
ground/earth system.
Figure 2.8 Grounding cable with connector
Step 3. Grounding cable plug with POC-127 Equipotential Terminal (See Figure 2-8).
2.2.3 Switch on the power
Switch on the reset switch on the front cover. (See Figure 2-4.)
Figure 2.9 Press the power button to boot system
2.3 Running the BIOS Setup Program
Your POC-127 is likely to have been properly set up and configured by your dealer
prior to delivery. You may still find it necessary to use the BIOS (Basic Input-Output
System) setup program to change system configuration information, such as the cur-
rent date and time or your type of hard drive. The setup program is stored in read-
only memory. It can be accessed either when you turn on or reset the panel PC, by
pressing the “Crtl+Alt+Del" key on your keyboard immediately after powering on the
computer.
The settings you specify with the setup program are recorded in a special area of
memory called CMOS RAM. This memory is backed up by a battery so that it will not
be erased when you turn off or reset the system. Whenever you turn on the power,
the system reads the settings stored in CMOS RAM and compares them to the
equipment check conducted during the power on self-test (POST). If an error occurs,