SNMP Management Module User Manual
8
rw = read/write access
When finished, Key in
exit
to leave configuration mode, key in
show snmp
and
press enter to display community information.
2.5.0.3
Deleting Community Strings
To delete specific community strings, key in configure to enter configuration mode.
Key in
no snmp community XXXX
and press enter to delete.
2.5.0.4
Assigning Trap Destinations
A manageable device sends traps when certain events take place.
Key in
configure
to enter configuration mode, key in
snmp host x.x.x.x version 2c
xxxx traps
(X.X.X.X is Ip address, xxxx is community name) and press enter to
create trap destination. Key in
(no) snmp trap xxx
(xxx is trap type) and press enter
to disable/enable trap type. This is following trap types:
auth, cold-start,
linkUpDown, port-security and warm-start
.
To display trap destination, key in
show snmp
and press enter. To display activated
or deactivated traps, key in
show snmp trap
and press enter.
2.5.0.5
Removing Trap Destinations
To remove specific trap destinations, key in
configure
to enter configuration mode,
and key in
no snmp host x.x.x.x traps
(x.x.x.x is Ip address) and press enter to
delete.
2.5.0.6
Enabling/Disabling DHCP
To Enable/Disable DHCP, Key in
configure
to enter configuration mode, and key in
(no) ip dhcp
and press enter to enable/disable DHCP.
2.5.0.7
Ending a Session
When ending a session, key in exit and press enter before disconnecting the cable in
order to stop the device from continuing to send feedback status through to the serial
port. If a session is not ended properly, the Telnet session cannot be launched.
2.5.0.8
Device-Specific Options— Downloading Files
With the iMediaChassis series, configuration file can be downloaded from a central
server via a TFTP protocol. Initiate this download via serial configuration or Telnet
session. Make sure the IP Address and the name of the file being downloaded are
correct in the Current Values section of the Main Configuration screen.
To download a file, key in
copy startup-config tftp://x.x.x.x
(x.x.x.x is TFTP server
IP) and press enter to download configuration file.
Содержание IMC-710-A
