Advantech FPM-7151W Series, Руководство пользователя

Страница: 40 / 42

FPM-7151W Series User Manual 32
C.1 Setting Serial Data for Expansion
The several kinds of timings below are already programmed in this module.
The input synchronous signals are automatically recognized.
Resolution HSYNC /KHz (+/-) VSYNC /Hz (+/-) PIXEL RATE /MHz
IBM, 720 * 400 31.469 70.087 28.322
VESA 640 * 480 31.469 59.940 25.175
VESA 640 * 480 37.861 72.809 31.500
VESA 640 * 480 37.500 75.000 31.500
VESA 800 * 600 35.156 56.250 36.000
VESA 800 * 600 37.879 60.317 40.000
VESA 800 * 600 48.077 72.188 50.000
VESA 800 * 600 46.875 75.000 49.500
VESA 1024*768 48.363 60.004 65.000
VESA 1024*768 56.476 70.069 75.000
VESA 1024*768 60.023 75.029 78.750
VESA 1152*864 67.500 75.000 108.000
VESA 1280*720 45.000 60.000 74.250
VESA 1280*800 49.702 59.810 83.500
VESA 1280*1024 63.981 60.020 108.000
VESA 1280*1024 79.976 75.025 135.000
VESA 1366 * 768 47.712 59.790 85.500
VESA 1440 * 900 55.935 59.887 106.500
VESA 1680 * 1050 65.290 59.954 146.250
VESA 1920 * 1080 67.500 60.000 148.500
Note! Even if the preset timing is entered, a little adjustment of the functions
such as Horizontal period, CLK-delay and display position, are required.
The adjusted values are memorized in every preset number.
Note! This module recognizes the synchronous signals with near preset timing
of the frequency of the HS and Vsync, even in the case that the signals
other than the preset timing that were entered.
Note! Because adjustments may not fit, such as differing magnifying ratios or,
in the case that you use it except for the display timing that was preset.
Recommend best resolution as 1920*1080.