Advantech EKI-9628G, Руководство пользователя

Страница: 53 / 148

40 EKI-9628G User Manual
The ensuing table for Mirror Status settings are informational only and display the
following: Session ID, Destination Port, Ingress State, Source TX Port and Source
RX Port.
4.5.3 Link Aggregation
Link Aggregation is a method for combining multiple network connections in parallel
in order to increase throughput beyond the capability of a single connection, and to
provide redundancy in case one of the links should fail.
4.5.3.1 Load Balance
The Load Balancing page allows you to select between a MAC Address or IP/MAC
Address algorithm for the even distribution of IP traffic across two or more links.
To access this page, click L2 Switching > Link Aggregation > Load Balance .
Figure 4.17 L2 Switching > Link Aggregation > Load Balance
The following table describes the items in the previous figure.
The ensuing table for Load Balance Information settings are informational only and
display the following: Load Balance Algorithm.
4.5.3.2 LAG Management
Link aggregation is also known as trunking. It is a feature available on the Ethernet
gateway and is used with Layer 2 Bridging. Link aggregation allows for the logical
merging of multiple ports into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG Management .
Figure 4.18 L2 Switching > Link Aggregation > LAG Management
The following table describes the items in the previous figure.
Item Description
Load Balance Algo-
rithm Select the radio button to select the Load Balance Setting: MAC
Address or IP/MAC Address.
Apply Click Apply to save the values and update the screen.
Item Description
LAG Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Name Enter an entry to specify the LAG name.