Advantech EKI-9628G, Руководство пользователя

Страница: 50 / 148

EKI-9628G User Manual 37
The ensuing table for System Time Information settings are informational only and
display the following: Current Date/Time, SNTP, SNTP Server Address, SNTP Server
Port, Time zone, Daylight Saving Time, Daylight Saving Time Offset, From and To.
4.4.4 Network Port
To access this page, click System > Network Port .
Figure 4.14 System > Network Port
The following table describes the items in the previous figure.
SNTP/NTP Server
Address Enter the address of the SNTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a SNTP server. Unicast SNTP requests will be sent to this address. If
this address is a DNS hostname, then that hostname should be
resolved into an IP address each time a SNTP request is sent to it.
SNTP Port Enter the port on the server to which SNTP requests are to be sent.
Allowed range is 1 to 65535 (default: 123).
Manual Time Click the drop-down menus to set local date and time of the system.
Time Zone Click the drop-down menu to select a system time zone.
Daylight Saving Time Click the drop-down menu to enable or disable the daylight saving
time settings.
Daylight Saving Time
Offset Enter the offsetting variable in seconds to adjust for daylight saving
time.
Recurring From Click the drop-down menu to designate the start date and time for
daylight saving time.
Recurring To Click the drop-down menu to designate the end date and time for day-
light saving time.
Non-Recurring From Click the drop-down menu to designate a start date and time for a
non-recurring daylight saving time event.
Non-Recurring To Click the drop-down menu to designate the end date and time for a
non-recurring daylight saving time event.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
HTTP Enter the value to designate the port number for the HTTP protocol
(default: 80).
HTTPS Enter the value to designate the port number for the HTTPS protocol
(default: 443).
TELNET Enter the value to designate the port number for the Telnet protocol
(default: 23).