Advantech EKI-9628G Скачать руководство пользователя страница 110

Страница: 110 / 148

EKI-9628G User Manual

High IP Address, Subnet Mask, Gateway, DNS,

Edit

(click to modify the settings) and

Clear

(click to clear the settings).

4.10.4.6

Lease Entry

To access this page, click

Management

DHCP Server

Lease Entry

The ensuing table for

Lease entry Table

settings are informational only and display

the following: IP Address, Client Mac, Start Time, End Time and Type.

4.10.5

SMTP Client

Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.

4.10.5.1

Global Settings

The Global Settings page allows you to set the active profile for the SMTP client.

To access this page, click

Management

SMTP Client

> Global Settings.

Figure 4.100 Management > SMTP Client > Global Settings

The following table describes the items in the previous figure.

The ensuing table for

SMTP Information

settings are informational only and display

the following: Active Profile Id.

4.10.5.2

Profile Settings

The Profile Settings page allows you to select the server IP, the server port, and
sender mail for the listed profile.

To access this page, click

Management

SMTP Client

Profile Settings

Figure 4.101 Management > SMTP Client > Profile Settings > Profile Settings

Item

Description

Active Profile

Click the drop-down menu to select the profile status (None, 1 or 2).

Apply

Click

Apply

to save the values and update the screen.

Содержание EKI-9628G





















































































































































Результаты поиска

Содержание EKI-9628G

Отзывы:

Похожие инструкции для EKI-9628G

Бренды по названию

Популярные бренды

Advantech EKI-9628G, Руководство пользователя

Результаты поиска

Содержание EKI-9628G

Отзывы:

Похожие инструкции для EKI-9628G

Бренды по названию

Популярные бренды