Advantech EKI-7428G Series Скачать руководство пользователя страница 76

Страница: 76 / 160

ANAGING

WITCH

The ensuing table for

MLD Snooping Information

settings are informational only: MLD

Snooping State, MLD Snooping Version and MLD Snooping V2 Report Suppression.

The ensuing table for

MLD Snooping Table

settings are informational only: Entry No.,

VLAN ID, MLD Snooping Operation State, Router Ports Auto Learn, Query Robustness,
Query Interval (sec.), Query Max Response Interval (sec.), Last Member Query count, Last
Member Query Interval (sec), Immediate Leave and

Edit

(click to modify the settings).

MLD Querier

The MLD Querier page allows you to select and enable/disable the MLD querier and define
the version (IGMPv1 or IGMPv2) when enabled.

To access this page, click

L2 Switching

Multicast

MLD Snooping

MLD Querier

Figure 4-35.

L2 Switching > Multicast > MLD Snooping > MLD Querier

The following table describes the items in the previous figure.

The ensuing table for

MLD Querier Status

settings are informational only: VLAN ID,

Querier State, Querier Status, Querier Version and Querier IP.

MLD Snooping
Report Suppression

Select

Enable

Disable

to designate the status of the report suppression.

Apply

Click

Apply

to save the values and update the screen.

Table 4-33.

L2 Switching > Multicast > MLD Snooping > MLD Querier

Item

Description

VLAN ID

Enter the VLAN ID to configure.

Querier State

Select

Enable

Disable

status on the selected VLAN.

Enable: Enable IGMP Querier Election.

Disable: Disable IGMP Querier Election.

Querier Version

Select the querier version (IGMPV1 or IGMPV2) designated to the MLD
Querier function.

Apply

Click

Apply

to save the values and update the screen.

Table 4-32.

L2 Switching > Multicast > MLD Snooping > MLD Settings (Continued)

Item

Description

Содержание EKI-7428G Series

































































































































































Результаты поиска

Содержание EKI-7428G Series

Отзывы:

Похожие инструкции для EKI-7428G Series

Бренды по названию

Популярные бренды

Advantech EKI-7428G Series, Руководство пользователя

Результаты поиска

Содержание EKI-7428G Series

Отзывы:

Похожие инструкции для EKI-7428G Series

Бренды по названию

Популярные бренды