Advantech EKI-7428G Series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 160

background image

C

ONFIGURATION

U

TILITY

22

3.1.4 Using the Graphical (Web) Interface

The graphical interface is provided via a web server in the switch and can be accessed via a
web browser such as Opera, Mozilla, or Internet Explorer.

HTTP and HTTPS (secure HTTP) are supported for access to the web server. By default,
both protocols are enabled. Either or both may be disabled to secure the switch. (See the
Remote Access Security topic in this section.)

To access the graphical interface, enter a URL like HTTP://192.168.1.1 in your browser's
address bar. Replace “http” with “https” to use secure http and replace “192.168.1.1” with
your switch's IP address if you've changed it from the factory default.

The web server in the switch uses a signed security certificate. When you access the server
via https, you may see a warning dialog indicating that the certificate was signed by an
unknown authority. This is expected and to avoid this message in the future you can choose
to install the certificate on your computer.

3.1.5 Configuring the Switch for Network Access

To control and monitor the switch via the network, it must be configured with basic network
settings, including an IP address and subnet mask. Refer to the quick start guide in Section
1 for how to initially access your switch.

To configure the switch for network access, select [Add Menu Address Here] to reach the
System Settings menu. The settings in this menu control the switch's general network con-
figuration.



DHCP Enabled/Disabled: The switch can automatically obtain an IP address from a
server using the Dynamic Host Configuration Protocol (DHCP). This can speed up initial
set up, as the network administrator does not have to find an open IP address.



IP Address and subnet mask configuration: The IP address for the switch can be
changed to a user-defined address along with a customized subnet mask to separate
subnets.



Default Gateway Selection: A Gateway Address is chosen to be the address of a router
that connects two different networks. This can be an IP address or a Fully Qualified
Domain Name (FQDN) such as “domainname.org”.

JavaScript must be supported and enabled in your browser for the graphical inter-
face to work correctly.

This manual describes and depicts the web user interface in detail. The terminal
interface is not specifically shown but is basically the same.

Advanced users can set the IP address to 0.0.0.0 to disable the use of an IP
address for additional security. However, any features requiring an IP address (i.e.,
web interface, etc.) will no longer be available.

«
...
33
34
35
36
37
...
»

Содержание EKI-7428G Series

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EKI-7428G Series

Бренд: JDS Uniphase Страницы: 40

Бренд: BABBITT Страницы: 14

Бренд: BABBITT Страницы: 10

Бренд: Jabra Страницы: 4

LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES

Бренд: Jabra Страницы: 2

Бренд: LOVATO ELECTRIC Страницы: 37

MatrixPRO 8x8 DVI

Бренд: Barco Страницы: 2

Бренд: 3Com Страницы: 62

Elinx EIR510-2MC-T

Бренд: B&B Electronics Страницы: 107

Guard Master 440N-Z2NRS1A

Бренд: Allen-Bradley Страницы: 4

Бренд: Raritan Страницы: 4

Бренд: KYLAND Страницы: 34

Бренд: TRENDnet Страницы: 2

Бренд: Xantech Страницы: 5

DHS-LIT-SWP-DHS

Бренд: Digital Home System Страницы: 2

Бренд: Netis Страницы: 9

Бренд: BJ Live Страницы: 2

DH-PFS4428-24GT-370

Бренд: Dahua Technology Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды