Advantech EKI-7428 Series, Руководство пользователя

Страница: 53 / 159

EKI-7428 Series User Manual 40
4.5 L2 Switching
4.5.1 Port Configuration
Port Configuration describes how to use the user interface to configure LAN ports on
the switch.
To access this page, click L2 Switching > Port Configuration .
Figure 4.15 L2 Switching > Port Configuration
The following table describes the items in the previous figure.
The ensuing table for Port Status settings are informational only: Port, Edit (click to
enter description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and
FlowCtrl Status.
Item Description
Port Click the drop-down menu to select the port for the L2 Switch setting.
Enabled Click the radio-button to enable or disable the Port Setting function.
Speed Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Duplex Click the drop-down menu to select the duplex setting: Auto, Half or
Full.
Flow Control Click the radio button to enable or disable the flow control function.
Fiber Port Click the drop-down menu to select the port for the L2 Switch Fiber
port setting.
Enabled Click the radio-button to enable or disable the Fiber Port Setting
function.
Speed Click the drop-down menu to select the fiber port speed: Auto, Auto-
1000M, 100M, or 1000M.
Duplex Click the drop-down menu to select the duplex setting: Half or Full.
Flow Control Click the radio button to enable or disable the flow control function.
Apply Click Apply to save the values and update the screen.