Advantech EKI-7428 Series, Руководство пользователя

Страница: 80 / 159

67 EKI-7428 Series User Manual
The ensuing table for Loopback Detection Global Information settings are
informational only: State, Interval and Recover Time.
4.5.13.2 Port Settings
The Port Settings page allows you to select ports that are detected by the loopback
detection function and configure their status (enabled or disabled).
To access this page, click L2 Switching > Loopback Detection > Port Settings .
Figure 4.55 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
The ensuing table for Loopback Detection Port Information settings are
informational only: Port, Enable State and Loop Status.
4.5.14 CFM
4.5.14.1 CFM Settings
To access this page, click L2 Switching > CFM > CFM Settings .
Figure 4.56 L2 Switching > CFM > CFM Settings
The following table describes the items in the previous figure.
The ensuing table for Information settings are informational only: CFM State.
Item Description
Port Select Enter the port to define the local loopback detection setting.
Enabled Select Enabled or Disabled to setup the Loopback Detection
function.
Apply Click Apply to save the values and update the screen.
Item Description
State Click Enabled or Disabled to enable CFM settings.
Apply Click Apply to save the values and update the screen.