Advantech EKI-7428 Series, Руководство пользователя

Страница: 115 / 159

EKI-7428 Series User Manual 102
The following table describes the items in the previous figure.
The ensuing table for PoE System Information settings are informational only:
Firmware Version, Maximum Power Available, Actual Power Consumption and
Overload Disconnect Type.
4.9.3.2 PoE Port Settings
The PoE Port Settings page allows you to configure the port status, its power
limitations, legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE Port
Settings .
Figure 4.109 Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
The ensuing table for PoE Information settings are informational only: Port, Enable
State, Power Limit From Classification, Priority, Legacy and Power Limit (W).
Item Description
Maximum Power
Available Select the value in Watts to set the maximum available power.
OverLoad
Disconnect Mode Click the drop-down menu to designate the overload mode:

Overload Port First:

Port-Based Priority:
Apply Click Apply to save the values and update the screen.
Item Description
Port Click the drop-down menu to select a PoE port.
Enabled Select Enabled or Disabled to designate the PoE port function by
ports.
Power Limit From
Classification Select Enabled or Disabled to designate the power limit
classification.
Legacy Mode Select Enabled or Disable d to designate the legacy mode option for
the port.
Priority Click the drop-down menu to configure the power supply priority:
Critical , Low , Medium or High . Default is Low .
Power Limit Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
Apply Click Apply to save the values and update the screen.