Advantech EKI-7428 Series, Руководство пользователя

Страница: 44 / 159

31 EKI-7428 Series User Manual
4.3.2 Logging Message
The Logging Message Filter page allows you to enable the display of logging
message filter.
To access this page, click Monitoring > Logging Message .
Figure 4.4 Monitoring > Logging Message
The following table describes the items in the previous figure.
System Location Click Default to enter the location: up to 256 alphanumeric characters
(default is Default).
System Contact Click Default to enter the contact person: up to 128 alphanumeric
characters (default is Default).
MAC Address Displays the MAC address of the switch.
IP Address Displays the assigned IP address of the switch.
Subnet Mask Displays the assigned subnet mask of the switch.
Gateway Displays the assigned gateway of the switch.
Loader Version Displays the current loader version of the switch.
Loader Date Displays the current loader build date of the switch.
Firmware Version Displays the current firmware version of the switch.
Firmware Date Displays the current firmware build date of the switch.
System Object ID Displays the base object ID of the switch.
System Up Time Displays the time since the last switch reboot.
Item Description
Item Description
Target Click the drop-down menu to select a target to store the log
messages.

Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.

File: Store log messages in a file.
Severity The setting allows you to designate a severity level for the Logging
Message Filter function.
Click the drop-down menu to select the severity level target setting.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity.

alert: Indicates action must be taken immediately.

crit: Indicates critical conditions.

error: Indicates error conditions.

warning: Indicates warning conditions.

notice: Indicates normal but significant conditions.

info: Indicates informational messages.

debug: Indicates debug-level messages.