EKI-1200-CE Series User Manual
16
See the following figure for an illustration of a completed DIN installation proce-
dure.
Figure 2.14 Correctly Installed DIN Rail Kit
3.
Grasp the bottom of the switch and slightly rotate it upwards. If there is resis-
tance, the switch is correctly installed. Otherwise, re-attempt the installation pro-
cess from the beginning.
2.4.1.2
Removing the DIN-Rail Mounting Kit
1.
Ensure that power is removed from the switch, and disconnect all cables and
connectors from the front panel of the switch.
2.
Push down on the top of the DIN rail clip release tab with your finger. As the clip
releases, lift the bottom of the switch, as shown in the following illustration.
\
Figure 2.15 Removing the DIN-Rail
Содержание EKI-1200-CE Series
