Advantech EKI-1200-CE Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 67

Advantech EKI-1200-CE Series Скачать руководство пользователя страница 57

47

EKI-1200-CE Series User Manual

These are the options for Modbus Slave Mode.

Figure 4.7 Port Configuration > Operation > Modbus Slave Mode

The following table describes the items in the previous figure.

Item

Description

Mode

Click the drop-down menu to select the port configuration mode:
Modbus Slave Mode or Modbus Master Mode.

Protocol

Select the protocol of the Slave Mode or Master Mode (RTU or
ASCII).

Slave Timeout (ms)

Specify the time duration in milliseconds for the EKI-1200-CE
Series to wait for a response after it has issued a command while
using Modbus/RTU or Modbus ASCII. After the timeout is expired
and no response is received, the EKI-1200-CE Series will regard
the command as failed. Note that the timeout for the host PC must
be greater than the timeout setting here specified, otherwise an
error will occur.

Delay Timeout (ms)

Enter a value to specify the delay timeout.

ASCII Timeout (ms)

Enter a value to specify the ASCII timeout.

Peer Number

Click the drop-down menu to select the number of network device
which you want to connect.

Save

Click

Save

to save the values and update the screen.

«
...
55
56
57
58
59
...
»

Содержание EKI-1200-CE Series




































































Отзывы:

Нет отзывов