Advantech ARK-1388V Скачать руководство пользователя страница 40

Страница: 40 / 109

ARK-1388V User Manual

CPU Feature

This item allows the user to adjust CPU settings such as CPU ratio, VID and
Thermal, and special features like XD flag.

Hard Disk Boot Priority

This item allows the user to select the boot sequence for system devices such
as HDD, SCSI, and RAID.

CPU L1 & L2 Cache [Enabled]

This item allows user to enable CPU L2 cache and ECC checking function.

CPU L3 Cache [Enabled]

This item allows the user to enable/disable CPU L3 cache.

Hyper-Threading Technology [Enabled]

This item allows the user to enable/disable Hyper-threading support for the
Intel® Pentium® 4 processor with HT Technology.

Quick Power On Self Test [Enabled]

This field speeds up the Power-On Self Test (POST) routine by skipping re-test-
ing a second, third and fourth time. The default setting is enabled.

First / Second / Third / Other Boot Drive

Hard Disk

Sets boot priority for the hard disk.

CDROM

Sets boot priority for CDROM.

USB-FDD

Sets boot priority for USB-FDD.

USB-ZIP

Sets boot priority for USB-ZIP.

USB-CDROM

Sets boot priority for USB-CDROM.

LAN

Sets boot priority for LAN.

Disabled

Disables this boot function.

Содержание ARK-1388V














































































































Результаты поиска

Содержание ARK-1388V

Отзывы:

Advantech ARK-1388V, Руководство пользователя, Страница: 40 / 109

Результаты поиска

Содержание ARK-1388V

Отзывы: