APAX-5202P User Manual
8
2.3 Hardware Installation
2.3.1 Hardware Configuration
APAX-5202P is a standard extension device of PCI for PC systems. All
the functions in a base system, such as the memory allocation, I/O port
locations, and address assignments, should be setup by following the
manual.
2.3.2 PCI-Slot Socket Selection
APAX-5202P supports standard PCI bus, and it only can be plugged on
an APAX controller.
2.3.3 Installation Procedure
1.
Please read this manual first, and then setup the jumper and switch
of the product in accordance to your needs.
2.
Turn off your APAX controller power, and make sure the power is
disconnected. Also turn off all accessories.
3.
Before handling APAX-5202P, discharge any static buildup on
your body which may damage the product.
4.
Position APAX-5202P in the correct APAX PCI Slot, and fix it.
5.
When removing the product, be sure to cut off the power first. Then
take APAX-5202P out of the system board.
2.3.4 Troubleshooting
If your system doesn’t boot correctly, please turn it off and make sure the
AC power is disconnected. Open the chassis cover of the PC and confirm
that APAX-5202P is firmly attached in its socket, that screws are locked
and APAX-5202P is set with correct jumper and switch configuration.
Please make sure the PC system is working correctly when APAX-5202P
is removed. If the PC system is working correctly after removing APAX-
5202P, please follow standard installation steps to reinstall APAX-
5202P. If the system still can’t boot correctly after the reinstallation of
APAX-5202P, please contact your supplier for support.
