Initial start-up
DLT-SA6100 Screen Blanking Solution, Manual V1.00
23 / 27
7.5.4.
Display settings
Logo configuration
Whether or not a graphic is displayed here when the screen is blanked is defined here.
Default logo
The ADLoG logo will be displayed on the blanked screen.
Blank (no logo)
The blanked display is black.
Custom logo
A customer logo will be displayed on the blanked screen. The logo can
be selected by choosing a file.
Possible file formats: png, jpg, gif, bmp.
The display size of the logo is automatically adjusted to the display size
by the Screen Blanking
software.
The logo is scaled – with fixed aspect ratio – so that the available
display area is optimally filled.
A frame is only left clear for the optional display of the time.
Show time
This setting specifies whether or not the current time is to be shown on the blanked display.
The time format corresponds to the MS Windows country settings for the ADLoG vehicle
mounted terminal in question.
Example for USA: hh:mm:ss / AM/PM
7.6. Roll-out across multiple terminals
A configuration created and stored using the
ADLoG Screen Blanking Config Tool
can be
copied and used on other vehicle mounted terminals.
This is only appropriate if the
Sensitivity
settings are suitable for multiple vehicles.
For example, copy the generated config file "cfgfile.json" via USB to other vehicle mounted
terminals (to the corresponding installation path, e.g. "C:\Program
Files\ADLoG\ScreenBlanking")
If a customer logo is to be displayed, the logo also needs to be copied to this path.
