Intended use
DLT-SA6100 Screen Blanking Solution, Manual V1.00
11 / 27
The
DLT-SA6100 Screen Blanking Solution
modules have been designed and built according
to modern technology standards and accepted safety regulations. Improper use can result in
injury to persons and damage to property, however, meaning that the following points must be
observed:
−
Correct transport, storage, commissioning and maintenance
−
Operation by trained personnel
−
The owner/operator commitments with regards to safety (accident prevention regulations,
occupational safety) must be observed.
4.2.1.
DLT-SA6100 Screen Blanking Solution on ADLoG vehicle mounted terminals
The
DLT-SA6100 Screen Blanking Solution
functionality has been tested on the following
ADLoG vehicle mounted terminals:
−
DLT-V72 Series
−
DLT-V83 Series
−
DLT-V6210
−
DLT-V4108
−
DLT-M8110 Docking Station
The
DLT-SA6100 Sensor Stick
has been connected in each case for the tests to a USB port
underneath the cable cover on the ADLoG vehicle mounted terminal.
These USB ports fulfill the following technical requirements:
−
USB 2.0 port type A
−
Vibration-proof (tested for resistance to vibration)
−
High-retention
NOTE
Advantech Co., Ltd. cannot guarantee the fault-free function of the
DLT-SA6100 Screen
Blanking Solution
on devices from other manufacturers as the technical specifications for
these devices and the USB ports installed in these devices are not known and cannot be
tested. Advantech Co., Ltd. shall not accept any liability for damage occurring due to the faulty
functioning of the
DLT-SA6100 Screen Blanking Solution
on devices from other
manufacturers.
Figure 4.1: DLT-SA6100 Sensor Stick connected to ADLoG vehicle mounted terminal
