Advantage Controls MicroTron O Series, Руководство пользователя, Страница: 3 / 16

2 3
Model Numbering
MicroTron Series O pump model numbers define the output, pressure and control functions present on a
particular pump. Your pump may be supplied with one or more of the options described in this manual. To
determine what features apply to your pump, check the model number label located on the pump.
Model Number Example O 1 30 X 1 – K F C 1 - S
Pressure Rating
1 =
110, 150, and/or 75 psi
2 =
250 psi
Gallon Per Day Rating
Control Options
X = Stroke Length Adjust
Voltage
1 = 120 volt - 50/60 Hz - .35A with USA plug
2 =
240 volt - 50/60 Hz - .65A no plug
Pump Head Material
K = Kynar
S = 316 Stainless
Seat Material
V = Viton
F = Teflon
H = Hypalon
Check Ball
C = Ceramic
D = Ceramic/single on discharge
S = Stainless
Tubing Connections
1 = 3/8” PE, 75-200 psi
2 = ¼” PE, 250 psi models
P = ¼” MNPT
V =
3/8” Clear flexible suction tubing
Special Options
S = 3-function injection valve
NOTES : This list represents our most popular options. If you have an option not covered, contact
the factory or your dealer for more details.
I. Introduction
This manual covers all facets of operation of the Advantage MicroTron™ pump, including unpacking,
mounting, electrical and plumbing connection, and start-up. Safety, maintenance and repair, warranty, and
factory information is also provided. Please read this manual completely before proceeding. Observe safety
protocols and heed all warnings and precautions.