Advantage Controls GF Series, Инструкция по установке, обслуживанию и ремонту

Страница: 2 / 16

2
Table of Contents
I. Introduction .................................................................................................2
II. Model Numbering and General Specifications ............................................3
III. Installation ...................................................................................................4
Electrical Wiring ...............................................................................4
Mounting Instructions .......................................................................4
Typical Installation and Measurements ............................................5
Relay and Logic Cards .....................................................................6
Start Up and Test Procedure / Recommendations ...........................7
IV. Front Panel Description ..............................................................................7
V. System Operation Overview .......................................................................7
Description of Set Up Menus ...........................................................7
VI. NanoTron mA Menu Map ............................................................................8
VII. Parts List ...................................................................................................10
VIII. Troubleshooting and Maintenance ............................................................12
IX. Warranty ...................................................................................................14
Reference Chart % Propylene Glycol .............................................................................15
Reference Chart % Ethylene Glycol ...............................................................................15
I. Introduction
The Advantage Controls Glycol Feed Systems are design to regulate pressure in closed loop Hydronic
Heating and Cooling applications.
Advantage Controls micro-processor base controller reads a solid state pressure transducer, displays
system pressure, and uses a 16 character keyboard for the entry of control parameters. The micro-
processor has built in real-time clock and EEPROM back-up for all user settings, in case of power
interruptions. Setting for all functions are made using the keyboard, readings are displayed on a back
lit 16 character alphanumeric display.
Advantage Controls Glycol Feeders are stand alone pre-wired, pre-plumbed systems designed for ease
of installation. Our systems are mounted on a powder coated steel frame with anchor points.
Advantage Controls Model Designation allows for a wide variety of configurations, operation and function
of each Glycol Feed Systems this is dependent on your specific model number. Please check your
model number against the selection guide for better understanding of your system.
Please read this instruction manual to become familiar with your system.