9
Step 2: TRANSFERRING FROM PC TO AMR
A. Verify the handheld is placed in the cradle and all cables are attached to the network.
Note First Time Use:
Start the HH FTP program. Press the “
Settings
” button, after selecting a
transfer type. Here you can setup the names for each handheld, the handhleds’ software installation
path, where the upload file name & path, and the download file name & path for each handheld.
For more indepth instructions please call Jayhawk Support.
The path must be set for the transfer process and each handheld has to be setup with their specific
name. To add a new Handheld, press the New HH button. Then type a name that has been given to
the handheld device. [The name is Dap1, Dap2, etc., for the number of handhelds.] Then select
the handheld from the drop down list to setup that specific device’s information.
Press on the Browse for File to Send to Handheld. Browse the drive for the location of the
JayHH.jot file, which is normally in C:\Jayhawk_Software_Data\DAP\From PC and select the
JayHH.jot file. Once highlighted, press on
Save
. Then press on the Browse for File to Receive
From Handheld. Browse the drive for the location of the JayHH.jin file, which is normally in
C:\Jayhawk_Software_Data\DAP\From HH and select the JayHH.jin file. Once highlighted, press
on
Save
. Press on
Save
when completed. Please call Jayhawk Support to fill out the rest.