Advantage Computer DAP HANDHELD, Справочное руководство

Страница: 15 / 24

15
4)
Use the numeric pad, or the physical keys on the
unit to type the new reading. Use the Backspace
(
BKSP
) button to erase the last character of
your reading. You can put in an Estimated
reading by pressing the
EST button. If the meter
was not supposed to be read press the
Unread
button. You can press the
Cancel
button or the
ESC
key to undo all of your changes and to
close the form. To accept your changes press,
the
Enter
button or press the
Enter key
on the
unit.
5)
This screen will show up if one of these three
conditions are met:
a. LOW : The new reading is lower
than an estimated reading calculated by the
JUS program.
b. HIGH : The new reading is higher
that an estimated reading calculated by the
JUS program.
c. ROLLOVER : The new reading is
lower than the Last Reading. This often a
mistyped reading, that the meter rolled over
all digits or the water back flowed through
the meter.
1234567890
Cancel
7
Enter
6 5 4
BKSP
0
8 9
1 2 3
Unread
EST
.
Reading seems high\low has
rolled over
Current Read
123456
Last Read 123000
-----------------------------------------
Difference 456
Estimated 444
Meter Serial #
45645241E
Meter Type Water
Service address:
1000 W. Miller Road
R = Re-read A = Apply
Re-read Apply