ADVANTAGE AIR MyAir5 Series, Руководство пользователя

Страница: 12 / 39

MyAir5 User Guide
12
larger requirement for air conditioning than in other rooms in the house.
Setting the MEDIA as MyZone will ensure that the system continues
running until the temperature set-point for
that room is achieved.
Only one temperature controlled zone can be the MyZone at any one
time, if you are using multiple zones it is recommended that you make
the largest zone the MyZone & then move the MyZone around as you
move around the home.
MyZone is an optional feature available on systems where MyZone has
been enabled, your dealer may enable this feature depending on the
way you use your system & the layout of the installation.
NOTE: MyZone is not available for systems with no temperature sensors
installed or if your MyAir5 is installed with a Mitsubishi Electric air
conditioning unit.

Motion (Optional): If your zone has a motion sensor installed this
zone will have the same functionality as a temperature zone (above) but
a walking man symbol will appear next to it. If you press the walking
man symbol it will turn dark grey indicating the motion sensor is
activated for that zone and pressing it again will deactivate it.
Let’s say your air conditioner is in cooling mode & you have activated
the motion sensor in your master bedroom which is currently set to
24
o
c; when MyAir5 detects the room has been empty for 10 minutes, it
will increase the temperature by 1
o
C to 25
o
c then after a further 10
minutes it will increase the temperature by another 1
o
c to 26
o
c as soon
as someone re-enters the room, the temperature setting returns to
normal.
When you are in heating mode your motion sensors will work in reverse
eg if no motion is detected for 10 minutes the temperature will be
decreased by 1
o
c.
HANDY HINT: Motion sensors are designed to save you energy, but to save
even more energy switch off zones you are not using.