8
2. Incoming calls can be answered by lifting the Privacy handset
.
3. Call can be terminated by placing the Privacy handset into its cradle
4. An active call can be terminated and an incoming call can be
rejected by pressing the PTT button on the Privacy handset for more
than 2 seconds.
5. To switch from an active call with the Privacy handset to hands-free
operation, press the PTT for a short period (a confirmation tone will be
heard through the speaker) and place the Privacy handset into its
cradle. Audio will then be routed to the speaker. If the PTT is pressed
for more than 2 seconds, it will terminate the call.
6. If the Privacy handset is not placed into its cradle, after the call is
terminated, a reminder tone will be heard through the speaker, one
minute after all activity is finished until the Privacy handset is returned
to its handset
Call Waiting in both Hands-free mode and with Privacy handset
1. To answer an incoming call during an active call, press the PTT
button for a short period. This will put the current call on hold and
answer the incoming call.
2. A short press on the PTT will toggle between the calls.
3. Pressing the PTT for more than 2 seconds will terminate the call.
Voice dialing in both Hands-free mode and with Privacy handset
With the handset in idle mode (with or without the Privacy handset
attached), press the PTT for two seconds. This will activate the voice
dialing function.
Charging the battery
1. With the handset turned off, the car kit will charge the battery to 60%
in approximately 1 hour. The charge time will be longer if the handset
is operational during charge time.
2. For operator convenience, the handset’s backlight will remain on for
ease of viewing during low/no-light conditions.
NOTE!
Batteries will charge within the temperature window of -10 C
to +40 C (50 F to 104 F). If the battery is outside the temperature
window, no charge current will be supplied to the battery.
Use of a Potato Mic (Optional Extra available from Motorola®
1. To use a Potato Mic. with the Car Kit, plug the connector on the end
of the coil cord of the Potato Mic. into the corresponding receptacle on
Junction Box.
2. Once connected, the pressing of the switch on the Potato Mic. will
deactivate the Visor Mic. And activate the Potato Mic.
Operating Specifications
Input voltage range:
11V dc to 32V dc
Operating ambient:
-30C to +60 C
