AdvanceTec AdvanceMobile AT3550A, Инструкция по установке и эксплуатации

Страница: 7 / 24

7
Caution:
The AdvanceMobile™ should be used with a negative ground
electrical system only. Reverse polarity (positive ground) will trigger
protection circuits which cause the cable fuse to open. Check the ground
polarity before you begin the installation to prevent wasted time and effort.
12V DC or 24V DC automotive systems are directly supported
Determine the best cable route to the vehicle ignition for the Power Cable
from the location where you intend to mount the Junction Box.
Diagram 4
1. The DC power cable shipped with the AdvanceMobile™ is suitable for
installation in most vehicles.
2. Route the black lead of the main power cable to a convenient chassis
ground and the red lead to the positive supply voltage connection points. If it
is necessary to penetrate the firewall, try to use an existing opening.
3. If there is no existing opening, drill a new hole approximately 9/16” or
3.5cm in diameter. Make sure that there is enough clearance on the opposite
side. Insert a grommet into the hole to prevent damage to the power cable.
When making connections on the engine side of the firewall, additional in-line
fuse holder (included) should be used at the connection points.
Diagram 5