16
Diagram 15
NOTE!
Both the PTT and the Programming button must be kept depressed
until the programming has been successfully completed and the 5 fast beeps
are heard on the speaker.
5. Once the new private ID is successfully programmed, the channel number
in the screen will no longer flash.
6. This process can be repeated with the other open channels until each of
the 9 channels are programmed with different private IDs
Operation
1. Select a channel by pressing the Left Channel Keys Up and Down.
If the Display shows a steady number (1-9), the channel displayed is the
channel selected and programmed. When the PTT is pressed, it will transmit
on that channel.
2. If the Display shows a slow flashing number (1-9), the channel is not
programmed. If the PTT is pressed, a reject tone will be heard.
3. If the Display shows a fast flashing number (1-9), a call is coming in from
the remote user who is programmed into the AdvanceMobile™ on that
channel number. Press the PTT to answer the incoming caller.
4. If the Display shows a fast flashing “U” a call is coming in from an
unknown remote user who is not programmed into the AdvanceMobile. Press
the PTT to answer the incoming caller.
5. If the Display shows fast flashing “E” a call is coming in from a remote
user programmed as an Emergency number.
Содержание AdvanceMobile AT3550A
Страница 23: ...23 ...
