Spatial Reference Manual
Page 68 of 158
Version 4.4
04/06/2019
satellites table.
11.5.3.1
Spatial Status Indicator
This indicator shows any problems with Spatial. Before a GNSS fix is achieved it will
show the status “Filter not initialised”. Once the filter has initialised it should show
“Healthy”. Clicking on the indicator will show the detailed status flags.
11.5.3.2
Fix Indicator
This shows the status of the GNSS fix. Under normal operating conditions it should
show either “3D Fix” or “SBAS Fix”. When satellite visibility is poor it may show either
“2D Fix” or “No Fix”.
11.5.3.3
Satellites Table
The satellites table shows the number of active satellites being used in the current
GNSS solution. More detailed information can be found in the satellites view, see
section 11.7.3.
11.5.4
3D Map
The 3D map shows Spatial's position on the Earth as well as a red trail of position
history. When the filter initialises the map will automatically reset the view to Spatial's
location. To move the camera click and drag on the map. To zoom in and out use the
scroll wheel. To change the camera view angle right click and drag or shift click and
drag.
11.5.5
3D Map Controls
11.5.5.1
Reset View
This resets the map view to Spatial's current position.
11.5.5.2
Clear History
This clears the current position history, this is the red trail shown on the map.