Spatial Reference Manual
Page 40 of 158
Version 4.4
04/06/2019
8.12 Sensor Calibration
Spatial's sensors are calibrated for bias, sensitivity, misalignment, cross-axis
sensitivity, non-linearity and gyroscope linear acceleration sensitivity across the full
operating temperature range and for each of the three sensor ranges.
8.13 Serial Number
The serial number can be inspected by using the device information dialogue in the
Spatial Manager software, see section 11.7.1. The primary serial number label is
located inside the enclosure and is accessible only by Advanced Navigation
technicians. The secondary serial number label is located on the outside rear of the
enclosure with the serial number encoded in a 2D data matrix bar code to assist
customers in tracking their units. The external label also contains the hardware
version and build date. Applications are available for most smart-phones that can scan
the 2D data matrix bar code to display the serial number.
Illustration 13: Spatial external serial number
label