9/04/2015
Free Standing Kiosk
Assembly and Operation Instructions
www.advancedkiosks.com
7
Installation
Assembling the Kiosk
The directions below are detailed for installing all the components of the kiosk and
instructions for permanent mounting.
The standard kiosk comes already assembled.
Installing the Computer
Install the computer into the bottom of the kiosk. This is accomplished by opening the
bottom door. Plugging in the cables
before
the computer is physically inside the kiosk is
much easier. Set the computer right next to the kiosk’s opening and plug the cables in
there.
When installing the computer it is important to follow the orientation label. The fans need
to be centered and pointing up. This is required for the kiosk to cool efficiently.
The following cables should be connected for a standard Free Standing Kiosk:
Note: The USB plugs are not port specific and can be plugged into any open USB jack.
Cables to Computer
Optional Equipment
Monitor – VGA or DVI
Printer - USB
Speaker – USB and 3.5 mm TRS plug
Camera - USB
Dual External USB – USB(x2)
Keyboard - USB
Wi-Fi – USB(x2)
Bar Code Scanner - USB
Power Cable
Credit Card Reader - USB
Network Cable – Cat5 plug
Biometrics - USB
