9/04/2015
Free Standing Kiosk
Assembly and Operation Instructions
www.advancedkiosks.com
16
External Keyboard Installation
The keyboard tray can be installed for temporary use or for permanent use. If the
keyboard is only going to be used occasionally we recommend the keyboard’s USB cable
come out the side of the assembly and plug into the external USB ports on the back of the
kiosk. For a permanent installation have the USB cable come out the hole in the back of
the keyboard.
Cord coming out the side of Tray. Cord coming out hole in back.
Cord coming out the side of Tray. Cord coming out hole in back.
If this is a permanent installation the knock out hole in the front of the kiosk will need to
be punched out. You will need a hammer and a metal punch, or screw driver to knock
out the plug. First locate the knock out. It is under the speaker holes, on the right side,
above the printer slot. Place some duck tape over the hole - this will keep the punch from
sliding and scratching the front of the kiosk. Place the punch on the knockout plug (make
sure you are in the center of the plug) and hit with a hammer until the plug falls out. See
pictures below.
