background image

 

5/23/2019 

 

Document Kiosk

 Assembly and Operation Instructions 

www.advancedkiosks.com

 

 

Our Support 

 
The  Document  Kiosk  is  a  reasonably  priced,  high  quality  kiosk.  We  are  happy  to  help 
you with any problems after you have read the manuals to learn about this product.  
 
Advanced Kiosks will support you in ownership as long  as  you own your kiosk, 

within 

reason

. Selling or giving it to another company or person will void  any  and all support 

and warranty.  There are a few prerequisites: 
 

 

The person assembling and installing the kiosk must be familiar with setting up 
computers, printers, monitors and must be able to read and follow directions.  

 

 

You  have  read  and  followed  the  directions  in  this  document  as  well  as  the 
directions  for  the  touch  screen  monitor  and  computer.  These  documents  are 
included  with  your  equipment  or  are  located  on  the  computer.  We  strongly 
suggest  you  read  these  documents,  so  that  you  can  get  the  full  value  of  this 
kiosk. 

 

 

The following are questions we can not answer:  

 

o

 

Network  questions.  This  is  not  part  of  our  equipment  and  we  do 
not know your network, or your security procedures so we cannot 
help you here. 

 

o

 

Virus questions - this is also part of your network/software. 

 

o

 

Electrical wiring of your building or location.  

 

For other questions, visit the knowledge base, or the support tab on our website: 

https://advancedkiosks.com/knowledgebase/

 

https://advancedkiosks.com/about-advanced-kiosks/kiosk-support/

 

 
 

Taxes 

All  products  from  Advanced  Kiosks  are  made  and  shipped  from  New  Hampshire.  New 
Hampshire  has  no  sales  tax.    If  it  is  required  for  anyone  who  is  purchasing  one  of  our 
products  to  pay  taxes  to  another  state  this  is  the  responsibility  of  the  person  or 
organization purchasing from Advanced Kiosks 
 
 
 
 
 

Содержание Document Kiosk




















Отзывы: