5/23/2019
Document Kiosk
Assembly and Operation Instructions
12
Computer
The computer will come installed in the Kiosk on vibration mounts. With the head area of
the kiosk open, attach all the cables to the computer and then set the computer into the
holding bracket provided. If it is needed to remove the computer, disconnect all cables
and then remove the nuts connecting the computer mount to the vibration mounts. Be
careful not to over-torque the vibration mounts, or they may break.
Computer Bolted on to Vibration Mount
Cables to Computer
Option cables
•
Monitor – VGA, DVI, or HDMI
- Printer
•
Speaker – USB and 3.5 mm plug to USB - Credit Card Reader
•
Keyboard – USB
- Handset
•
Power Cable
- Scanner
•
Wi-Fi
- Camera
- Finger print reader
Note: Our kiosks come with all cables labeled.
