Advanced Instruments Osmo1 Скачать руководство пользователя страница 69

Страница: 69 / 72

Osmo1

Single-Sample Micro-Osmometer User Guide

Appendix G

Warranty and warranty duties

By accepting and operating this instrument, the user and Advanced Instruments agree to the following responsibilities
which constitute contractual warranties and conditions between the seller and the user for the maximum benefit and
usefulness of the instrument.

Appendix G

Warranty and warranty duties

LIMITED WARRANTY CONDITIONS

Advanced Instruments warrants that for 12 months from

date of shipment, each new product sold or manufactured

is free from defects in material and workmanship under

normal installation, use and service.

Advanced Instruments agrees that such defects will be

remedied or new parts furnished in exchange for any

defective part delivered by the owner, transportation

charges prepaid, to the factory for our examination. If, in

our judgment, the part contains any such defect it will be

replaced, charging only for transportation.

This warranty does not extend to any instrument

subjected to negligence, accident, abuse, misuse or other

improper operation, or which has been tampered with,

altered or repaired by anyone other than Advanced

Instruments or its authorized service representatives. Nor

does this warranty extend to any consequential damages

caused by defects or improper use, or secondary damage

resulting from prior problems.

The above provisions do not extend the original warranty

period of any instrument or part thereof which has been

replaced or repaired thereunder.

Remedies made under the terms of this warranty in no

case include any obligation or responsibility for

transportation charges or arrangements.

All results, calibrations, effectiveness, medical diagnoses

and interpretations are the responsibility of the user.

MODEL NUMBER: _____________
SERIAL NUMBER: _____________
INSTALLATION DATE:

_____________

THIS WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, REPRESENTATIONS AND CONDITIONS OF

ANY KIND, EXPRESSED OR IMPLIED IN FACT OR BY LAW.

IN NO EVENT SHALL ADVANCED INSTRUMENTS BE

LIABLE UNDER THIS WARRANTY OR OTHERWISE IN

ANY MATTER FOR ANY REMOTE OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE BREACH OF THIS

WARRANTY OR CONDITION IMPLIED BY LAW OR

OTHERWISE, OR FOR ANY DAMAGE TO THE

INSTRUMENT OR ANY PART THEREOF CAUSED BY

IMPROPER INSTALLATION, UNAUTHORIZED REPAIR OR

ALTERATION, NEGLIGENCE, ABUSE OR MISUSE

INCLUDING USE OF IMPROPER GLASSWARE OR

REAGENTS, ACCIDENT, OR ACT OF GOD.

Attention is called to the user’s responsibility regarding

reasonable use, useful life of the instrument and

immediate notification of accident outlined in the

warranty duties section of the user guide and/or

service manual.

No person is authorized to assume for us any other

liability in connection with the sale or service of

this equipment.

Advanced Instruments reserves the right, at any time

without notice, to make changes in price, color, material,

specifications and models without incurring liability to

modify products previously produced, and to add or

discontinue models and accessories.

This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

Al1YW REV 0

Use of consumable products, including test cups, controls or calibrators from other manufacturers will impact the

instrument warranty. Vendor disclaims all other warranties, expressed or implied, including but not limited to the implied

warranties of title, noninfringement, merchantability and fitness for a particular purpose (regardless of any knowledge of

your particular needs) and those arising by statute or otherwise in law or from a course of dealing or usage of trade. If

implied warranties may not be disclaimed by applicable law, then any implied warranties are limited in duration to thirty

(30) days after the date of purchase. Some jurisdictions do not allow limitations on how long an implied warranty lasts so

the above limitation may not apply to customer.

Содержание Osmo1









































































Результаты поиска

Содержание Osmo1

Отзывы:

Advanced Instruments Osmo1, Руководство пользователя, Страница: 69 / 72

Результаты поиска

Содержание Osmo1

Отзывы: