3P
14P
3
Safety Precautions
Confirmation of Migration Conditions
- For product safety, if electrical current runs at 0.8 A or more the fuse will blow and
operation will stop. In such a case, contact a distributor for repair.
- Even if the fuse does not blow, accurate results are difficult to obtain if the temperature
exceeds 40 ˚C during migration, and the following changes should be considered in
such a case:
(1) Change the type of buffer.
(For example, change TAE buffer to TBE buffer for lower current usage)
(2) Reduce the concentration of buffer.
(3) Cool the buffer.
Do not use this product with wet hands.
Always use the special-purpose lid and power supply for the
migration tank. We are not responsible for any accidents or
damage caused by the use of other devices or equipment.
The power supply cannot be disconnected while the migration
tank lid is closed. Attempting to do so can cause damage.
Do not put fingers or objects into the migration tank while
electrical current is running.
Always make certain to turn off the power supply after the
electrophoretic run.
Always verify that the power supply is OFF and the migration tank
lid is opened before detaching the power supply.
When this product is not in use, or when you move it, detach the
power supply from the migration tank and remove the plug from
the outlet.
If this product is used in a manner not specified by the
manufacturer, the protection provided by the product may be
impaired.
14
Environmental conditions
Operating temperature:
Humidity:
Operating environment:
Altitude:
Transient overvoltage:
Protection class:
5-35
°
C
20-80 % RH non-condensing
Indoor use only
Up to 2000 m (6500 ft)
Installation Category II
Pollution Degree 2
Mupid-2plus migration tank:
1
Mupid-2plus migration tank lid:
1
Mupid-2plus power supply:
1
Gel maker set-L:
1
- Gel maker stand-L:
1
- Gel tray-L:
2
- Gel tray-S:
4
-
Comb-L:
2
Standard set contents
Содержание Mupid-2plus
Страница 1: ...DIC C 268 DIC 162...