ADURO P1 series, Руководство пользователя

Страница: 50 / 111

50
•
To reload the pellet container, simply open the access lid and pour in the pellets. This can also be
done during normal operation. Make sure not to come into contact with hot parts.
•
Whenever the pellet container and the auger become completely empty, the stove will be
automatically switched off. Upon the next ignition, you must load pellets onto the auger (see 7.6).
•
ATTENTION! If the stove is not installed properly, power outages may result in fume
spillages. Under specific circumstances, an uninterrupted power supply unit must be
installed.
Aduro A/S declines all responsibility for any damage which may be caused, directly or indirectly, to persons,
animals, or objects as due to non-compliance with any provision specified in the manual, especially warnings
regarding installation, use, and maintenance of the stove.
The responsibility for improper use of the product is entirely borne by the user and relieves the manufacturer
from any civil and criminal liability. Tampering or unauthorized replacement with non-original spare parts
could be hazardous for the operator’s safety and relieves the company from any civil and criminal liability.
2. Technical specifications
Power 2,8 kW 8 kW
Dimension (HxWxD) 110,09 x 53,3 x 54,35 cm
Weight 95 kg
Fuel (dimension)
Wood pellets (Ø6 mm L

30 mm)
Exhaust / Inlet Ø80 / Ø50 mm
Draft 12±2 PA
Pellet container capacity 15 kg
Voltage 230V ± 15%
Frequency 50 Hz
Electrical power during the operation 55
– 160W *
Electrical power during the initialization 400
– 460W **
Maximal efficiency 92% 91%
Nominal use of pellet 1,4 kg 2,0 kg
Minimal use of pellet 0,7 kg
CO emission reduced on 13% 0,0086% 0,0084%
Maximal exhaust gas temperature 75°C 127°C
Dust content 13 mg/m
3
15 mg/m
3
Mass flow 4,4 g/s 6,49 g/s
Operating temperature 5 - 60°C
Storage temperature 10 - 65°C
Max. relative humidity (with no condensation) 95%
Flamme verte class

Energy Efficiency Index (EEI) / Class 122 / A+