ADTRAN TSU 120 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 143

background image

FCC regulations require that the following information be provided to the

customer in this manual:

1.

This equipment complies with Part 68 of the FCC rules. The required label is affixed
to the bottom of the chassis.

2.

An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network or
premises wiring using a compatible modular jack which is Part 68 compliant. See
Installation Instructions for details.

3.

If your telephone equipment TSU 120 causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they will
notify you in advance. But if advance notice isn’t practical, you will be notified as
soon as possible. You will be advised of your right to file a complaint with the FCC.

4.

Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper operation of your equipment. If they do, you
will be given advance notice so as to give you an opportunity to maintain
uninterrupted service.

5.

If you experience trouble with this equipment TSU 120, please contact ADTRAN at
(205) 971-8000 for repair/ warranty information. The telephone company may ask
you to disconnect this equipment from the network until the problem has been
corrected, or until you are sure the equipment is not malfunctioning.

6.

This unit contains no user-serviceable parts.

7.

The following information may be required when applying to your local telephone
company for leased line facilities.

Digital Facility Service Order

Network

Service Type

Interface Code

Code

Jacks

1.544 Mbps Digital Interface SF

04DU9-BN

6.0F

RJ-48C

1.544 Mbps Digital Interface SF with B8ZS

04DU9-DN

6.0F

RJ-48C

1.544 Mbps Digital Interface ESF

04DU9-1KN

6.0F

RJ-48C

1.544 Mbps Digital Interface ESF with B8ZS

04DU9-1SN

6.0F

RJ-48C

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio frequencies.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Change or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.

«
1
2
3
4
5
...
»

Содержание TSU 120
















































































































































Отзывы:

Нет отзывов

Похожие инструкции для TSU 120

Бренд: National Instruments Страницы: 62

Бренд: Multimetrix Страницы: 35

Бренд: KLIPPEL Страницы: 16

Бренд: Extech Instruments Страницы: 14

Бренд: Meterman Страницы: 14

Бренд: ADTRAN Страницы: 2

Бренд: UNI-T Страницы: 47

Бренд: GTC Страницы: 2

Бренд: Steinberg Systems Страницы: 21

Бренд: Circuit-test Страницы: 14

Бренд: Performance Tool Страницы: 2

Бренд: TECPEL Страницы: 54

Бренд: ADInstruments Страницы: 17

Бренд: Brymen Страницы: 20

Бренд: Brymen Страницы: 16

Бренд: Brymen Страницы: 16

Бренд: Brymen Страницы: 24

Бренд: Brymen Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды