ADTRAN Total Access SHDSL LTU, Установка и эксплуатация

Страница: 7 / 14

61182118L1-5B Issue 2, July 2004 7
Table 3 lists the factory default values for each of the
2W/4W SHDSL LTU provisioning options.
Table 3. Default Provisioning Values
Provisioning Options Values Default
Unit Options
Line Card Service State In Service
Out of Service - Unassigned
Out of Service - Maintenance Out of Service - Maintenance
Cross-Connect Map For each timeslot assignment:
0 = unassigned, idle pattern transmitted
out of associated port
1 = G.703
32 = G.704 CCS Framing timeslot
Full G.703 Service with
G.704 Framing = NT Delivered
LT Mode Clk Source Internal Clock
G.703 RX Clock
SHDSL RX Clock Internal Clock
External Port Alarms Disabled
Enabled Disabled
NTU Auto Provisioning Disabled
Enabled Disabled
SHDSL Options
Interface Mode 2-wire
4-wire 2-wire
Payload Rate (kbps) Enter a new value for N from 3 to 32,
where Payload Rate (kbps) = N x 64 2048 (N=32)
SNR Margin Alarm Threshold (dB) Disabled
1-15 Threshold in dB Disabled
Loop Attenuation Alarm Threshold (dB) Disabled
1-127 Threshold in dB Disabled
Outage Auto-Retrain Disabled
Enabled Disabled
PM Thresholds See below for Loop 1 and Loop 2
ES 15 Minute Alarm Threshold Disabled
1 to 900 = Alarm Threshold Disabled
SES 15 Minute Alarm Threshold Disabled
1 to 900 = Alarm Threshold Disabled
UAS 15 Minute Alarm Threshold Disabled
1 to 900 = Alarm Threshold Disabled
CVC 15 Minute Alarm Threshold Disabled
1 to 65535 = Errors Disabled
LOSWS 15 Minute Alarm Threshold Disabled
1 to 900 = Alarm Threshold Disabled